6 Piece Carbon Steel NPT Pipe Tap Set, 1/8

Description

Carbon steel pipe taps are designed to clean and or re-thread damaged or jammes pipe threads. They are appropriate for threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like teflon tape or pipe compound.
Size : Set
Material : Carbon Steel
Finish : Uncoated (Bright)
Style : NPT
Cutting Direction : Right Hand
NPT pipe tap sizes included in set are : 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in. and 1 in.
Sets comes in durable case
Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
Appropriate for threading a wide variety of materials both ferrous and non-ferrous
Nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap
Thread tapers 3/4 of an in./ft.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
California residents see Prop 65 WARNINGS